BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a forward bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a back bumper
      Removal and installation of the back shock-absorber
      Removal and cover installation обтекателя
      Removal and installation of a forward wing
      Removal and cowl installation
      Cowl adjustment
      Removal and installation of a cover of a luggage carrier
      Adjustment of a cover of a luggage carrier
      Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier
      Removal and installation газонаполненного an emphasis of a cowl/cover of a luggage carrier
      Replacement moldingов and model emblems
      Removal, installation and door adjustment
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and window adjustment
      Removal and installation electric windows
      Removal and electric motor installation windows
      Removal and installation of a mirror of an external kind / a sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of a cover of a luggage carrier

Cover of a luggage carrier, loop and газонаполненный the shock-absorber

1 — a luggage carrier cover
2 — a sealing lining
3 — a loop
4 — an emphasis
5 — a rubber cover
6 — газонаполненный an emphasis
7 — an emphasis
8 — an emphasis
9 — the handle with a lining
10 — a light disk
For a lamp of illumination of licence plate
11 — a key with the microswitch
12 — a press plate
13 — a cover of the cylinder of the lock

14 — connecting draught
15 — a nut
16 — the lock
17 — bracket the lock
18 — a lining of the cylinder of the lock
19 — the lock cylinder
20 — a film
21 — a nut
22 — the holder of licence plate
23 — a remote washer
24 — felt
25 — a washer
26 — саморез
27 — a cover


 REMOVAL

1 Disconnect facing of a cover of a luggage carrier, address to Section Removal and installation of facing of a cover of a luggage carrier.
2 Extend a plait of a cable from a luggage carrier cover. For this purpose расстыкуйте штекерные connections of illumination of licence plate and the uniform lock. Fix a cord on tips and extend a plait.

The cord remains in a cover of a luggage carrier and serves for simplification of installation of cables.

3 Mark position of a cover of a luggage carrier at loops. For this purpose lead round a lath of a loop a felt-tip pen.

4 Prop up reliably a cover of a luggage carrier and ask it to take the assistant.
5 Oslabte screws at the left and on the right-2, turn out the screw-3, 4 – an emphasis.


 INSTALLATION

7 Put into place a cover of a luggage carrier by means of the assistant. Screw the screw-2 without tightening it.
8 Expose a luggage carrier cover according to the put marks and fix.
9 If the cover was replaced, adjust it.
10 Enter electric wires of a lamp of illumination of licence plate and the uniform lock by means of a cord into a cover of a luggage carrier and join them.
11 Fix the facing, the damaged clips replace.