|
Design Manual transmission |
5-step, all transfers forward are synchronised |
|
Type |
|
316i, 318i, 320i, 323i, 325i, 328i |
Getrag B + |
|
330i |
ZFC |
| Transfer relations |
| Transfers 1/2/3/4/5/задний a course: 1 |
| 316i, 318i, 320i, 323i, 325i, 328i |
4.23/2.52/1.66/1.22/1.00/4.04 |
| 330i |
4.21/2.49/1.66/1.24/1.00/3.85 |
| 320d |
5.09/2.80/1.76/1.25/1.00/4.71 |
| 330d |
5.24/2.92/1.82/1.27/1.00/4.72 |
| The main transfer (In brackets values for models with АТ are resulted) |
| Models with a back drive |
| 316i |
3.23 (4.44: 1) |
| 318i |
3.38 (4.44: 1) |
| 320i |
3.38 (3.38: 1) |
| 325i |
3.15 (3.23: 1) |
| 330i |
2.93 (3.38: 1) |
| 320d |
2.47 (3.07: 1) |
| 330d |
2.28 (2.81: 1) |
| Models with a full drive |
| 325i |
3.23 (3.23: 1) |
| 330i |
3.07 (3.15: 1) |
| 330d |
2.35 (2.93: 1) |
| Oil type |
| RKPP Transmissionnoe oil MIL-L-2105 or API-GL-4, viscosity SAE 80 (If the stopper of refuelling of oil has a yellow or green label, use special oil BMW if an orange label - ATF-Dexron, resolved BMW) |
| Reducer of the back bridge Oil for гипоидных transfers SAE 75W-90 (AGIP HLX, ARAL oil for transmissions BS, AVIA гипоидное 75W-90 EP, BMW oil for reducers of back bridges Synthetik OSP, CASTROL SAF-XO, DEA Dearon BHS, FINA Potronic MS and–MX, MOBIL Gearlube VS 600, BP Energear SHX, ELF Tranself BM 75W-90, SHELL oil for transmissions OLS-BMW, MOTUL Hypo Synt, ESSO NLS 75W-90) |
| Oil volume |
| Manual transmission |
About 1.1 l |
| Reducer of the back bridge |
0.9 l |
| Efforts of a tightening of carving connections |
The moments of an inhaling of fixture are resulted in the text of the Head and on some иллюстрациях*.
*Выделенные in the text a bold type the inhaling moments are subject to exact observance; the efforts not allocated with a bold type are resulted only roughly |
| Bolts of fastening of a flange of a check point |
| М8 |
22 Nm |
| М10 |
45 Nm |
| М12 |
70 Nm |
| Kardannyj shaft to a box flange |
| М10, a durability class “8.8” |
50 Nm |
| М10, a durability class “10.9” |
60 Nm |
| М12 |
100 Nm |
| Fastening nuts карданного a shaft to a reducer |
| Nuts М8 |
40 Nm |
| Nuts М10 |
70 Nm |
| Drain stopper of oil Manual transmission |
50 Nm |
| Jellied stopper of oil Manual transmission |
50 Nm |
| Stopper of oil of a reducer |
50 Nm |