BMW 3 series E46

1 Remove facing of a door and a door cover in a back part, address to corresponding section.
2 Turn away screws of fastening of glass to стеклоподъемнику, displace glass completely upwards and fix two wedges from within.
3 Turn away a nut-2 and-3 fastenings of the back tyre windows-1. Preliminary remove hermetic from a nut-3.
4 Take out the tyre back windows inside downwards and put in doors.

5 Cut off a collar of a cable-1.

6 Take out a clip-2.
7 Rasstykujte a socket-3.
8 Turn away a nut-4 and-5.
9 Take out the forward tyre windows-6 with the electric motor-7 inside downwards and put below in doors.
10 Take out стеклоподъемник from a door. Thus at first take out a forward part through an aperture in door sheet.

11 Insert стеклоподъемник into a door and displace a finger through an aperture in door sheet.
12 Fix стеклоподъемник the moment 8 Nm. Behind on the bottom nut put hermetic.
13 Join a socket at the electric motor.
14 Fix a clip for directing a cable on door sheet.
15 Fix top directing with a new collar of a cable on door sheet.
16 Fix glass screws and adjust, address to corresponding section.
17 Establish door facing, address to corresponding section.