BMW 3 series E46
Since 1998 of release
Repair and car operation
The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
- Power supply systems, injection and release
Security measures and rules of observance of cleanliness at work with fuel system
Removal and installation of the gauge of a stock of fuel / the fuel pump
Check of the gauge of a stock of fuel
+ The power supply system of petrol engines
- System of injection of fuel of the petrol engine
The general information and security measures at work
Principle of work of system DME
Removal and installation of injectors
Check of system of injection of the petrol engine
Check and adjustment of turns of idling and concentration WITH
+ The power supply system of diesel engines
+ System of release of the fulfilled gases
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ Electric equipment schemes
Check of system of injection of the petrol engineFor system search of malfunctions and their elimination are required special риборы. Address to Section Diagnostics of malfunctions. Work it is desirable to spend HUNDRED in conditions. Here external checks are described only.
1 Check up pressure and degree заряженности the storage battery.
2 Check up all safety locks, address to Section Replacement of safety locks.
3 Rasstykujte and again join all штекерные connections of corresponding electronic system. Check up reliability of fastening штекерных connections and cables in an impellent compartment.
4 Check up all connections of weight and reliability of contacts.
5 Check up tightness of hoses and pipelines. Pay attention to presence of a time and cracks. Tighten the weakened connections.