BMW 3 series E46

1 Remove the brake lever, address to corresponding section.
2 Remove pads a lay brake, address to corresponding section.

3 Remove the lock Pad brakes, for this purpose take out a finger-1.

4 Turn away bolts-3 and remove a support of a cable of a brake.
5 Disconnect a cable and extend it from a protective tube.

1 Lay a cable to the lever of a brake and to a back brake.

Inserting a cable into a protective tube, watch that the cable support adjoined to a protective tube.

2 Connect a cable to a plastic clip.

3 Insert a cable support into a cable and fix at a board of a brake two bolts-2.

4 Collect a lay brake, address to Section Removal and installation Pad a lay brake.
5 Establish the brake lever, address to corresponding section.
6 Adjust a brake, address to corresponding section.